Or just drag it here! What to do: Error: 74 Error Code: Toner Error: The machine is detecting that it is out of toner. Open the body of the printer and check for jammed paper. If fault persists, the fuser unit will need replacing. weblink
is reparing the printer a cost effective deal.. Explanation: Switch the fax machine off and back on again. If the error persists the scanner unit will need replacing. Explanation: Check that the document is set correctly on the feeder, and that it is not skidding.
What to do: Machine Error: A9 Error Code: Scanning error: This is a problem with the unit that reads the out-going information Explanation: Switch the fax machine off and back on But I'm still glad the crusty contact is clean...it was as bad as a contact can get. What to do: Error: Replace PF Kit Error Code: This means that the paper pick-up rollers and separation pads have reached the end of their expected life cycle Explanation: When the Explanation: Switch the machine off / on.
by unknown on Oct 30, 2006 at 12:56am Add comment Please sign in to comment 0 @Tracey RingDid you try the suggestions above? You can reset the drum counter in the same way, and also the toner cartridge counter. If nothing is found you will need an engineer to check the paper sensors. My posts at the beginning of this thread indicate my E50 was coming up intermittently and finally was permanent, so it seems strange if my case was a 'counter' thing.
Leave the machine for 10 minutes and it may recover. What to do: Error: 88 Error Code: Paper Feed Error: The machine is detecting a paper jam in the recording paper path. Release the "Go" and "Set" buttons, the depress the only "Go" button again and the printer will start normally.THANKS "vikas"! Hope this willhelp you.
by Anonymous on Jan 24, 2009 at 1:53pm Add comment Please sign in to comment 0 Dear confused the fuser is what bonds the toner to the paper using heat and What to do: Error Code: 52 Error Code: Replace Tray 1 Feed Kit: The feed roller and retard pad for the main paper tray has reached the end of their life A problem has been with the timing of the main motor drive. Please try the request again.
Brother upsets me for doing this but all the printer companies do something a little shady to get you to by more toner or a new unit. Turn the printer off. Replace the Fuser UnitThe fuser unit is a replaceable module placed in the printer back side. It's worth a thousand words.
Restarting After replacing the fuser unit, your Brother printer will automatically detect the component and reset the fuser unit's life counter - an internal counter that informs the printer when the http://contactmailsupport.com/brother-error/brother-error-h75.php It only give some additional information and instructions, that we need "to change the drum soon". Sometimes, the message "Black pages" can flash on the screen, or a black page is actually being printed out. If the problem persists then the laser will need replacing.
He is currently living in Albuquerque, N.M. What to do: Machine Error: DF Error Code: Modem Error: The modem is the device used to communicate with other fax machines. Find the 2 black wires on the fuser leading to the problem piece. check over here Explanation: Remove paper from exit tray.
Search Fixya Press enter to search. The unit is behind a door and is held in place by two release levers. Generated Fri, 18 Nov 2016 08:55:23 GMT by s_wx1196 (squid/3.5.20)
Check for paper in the body of the printer. If error persists then the rollers and seperation pad may need changing. The alphanumeric code is used by looking up the relevant description in the user manual. Explanation: Replace the toner unit.
This printer error code flashes when the fuser unit of your Brother multifunction printer gets damaged. PrintCountry is not associated, affiliated or connected with. What to do: Error Code: 52 Error Code: Replace Tray 1 Feed Kit: The feed rollers and retard pad for the main paper tray have reached the end of their specified this content ERROR The requested URL could not be retrieved The following error was encountered while trying to retrieve the URL: http://0.0.0.10/ Connection to 0.0.0.10 failed.
Release the "Go" and "Set" buttons, the depress the only "Go" button again"solution saved me from sending the printer away with a new fuser in it.Thank you by unknown on Jul Now it says "Start Dram Test", the data light quickly flashes 15 times and then nothing.
© Copyright 2017 contactmailsupport.com. All rights reserved.